In the event that you have switched your internet provider or router, then the connection of your camera has to be reestablished. This helps give a step-by-step explanation of how to connect Laview camera to new wifi thus allowing you to view live without any difficulties besides that.

Why Reconnecting Is Important

LaView cameras need a strong Wi-Fi connection. The network change will result in the camera not reconnecting automatically, and thus it will require manual setup.

Steps: How To Connect Laview Camera To New WiFi

1. Power On the Camera

Check if your LaView camera or NVR is plugged in and turned on properly.

2. Open LaView App & Laview Login

Open the LaView app on your smartphone. Perform Laview login using the email and password you used to register.

3. Remove Old WiFi Settings

In Device Settings, find your camera. Select Reset Network or Change WiFi based on your model.

4. Connect to New WiFi

From the list, select your new Wi-Fi network and type in the correct password. During the setup, keep your phone near the camera.

5. Scan QR Code / Sync Camera

The app might prompt you to either scan a QR code or to press the sync button on the camera to complete the pairing process.

If the camera doesn’t Connect

• Make sure that your Wi-Fi is on the 2.4GHz spectrum (most LaView cameras do not work with 5GHz).
• Power cycle your router and camera.
• Double-check the Wi-Fi password.

Factory Reset Option (For NVR Users)

• If nothing helps, then a factory reset Laview NVR has to be done:
• The reset button on the NVR should be pressed and held for 10–15 seconds.
• Add cameras again and repeat the Wi-Fi setup from the beginning.

Final Words

By following these steps, how to connect Laview camera to new wifi is quick and easy. The right Laview login and, if necessary, the factory reset Laview NVR will have your camera operating again with safe and smooth monitoring.